Foxflash ecu programmer successfully read and write 2016 Range Rover Evoque 2.0 ED4 MEDC 17.9 ECU.
It is fine on bench, but cannot do Flexray ECU’s 2017 onwards.
Connect the multifunction cable as follows:
BOSCH MEDC17.9 [ 1793 ] – Land Rover [Diesel] pinout
To read and write use the following driver:
→ BENCH TRICORE
→ LAND ROVER
→ TC1793 – LAND ROVER
→ MEDC17.9
Some MEDC17.9 enter in Bench mode with another CAN line. If with the previous pinout doesn’t go in bench tricore mode, then try again by connecting it as follows:
Bench Read OK
Bench Write OK
Checksum Tool OK
