Foxflash Read and Write Hyundai Delphi MT86 in Boot

By | February 14, 2023

Hyundai/Kia Delphi MT86 with TC1766 read and write is done using foxflash/new kt200 ecu programmer.

 

How to Read and Write DELPHI MT86 [ TC1766 INT.F.] – Hyundai, Kia

 

Step 1: Read and Write ECU

Connect with the multifunction cable the following pinout and the boot shown below.
Use the driver:
→ TOOLS BOOT MODE
→ INFINEON TRICORE Boot
→ SAK TC1766

First, lift the pin shown:

Foxflash Read And Write Delphi MT86 6

Follow on next page..

Foxflash Read And Write Delphi MT86 7

Foxflash Read And Write Delphi MT86 8

Foxflash Read And Write Delphi MT86 3

ATTENTION:
If the password error message appears at the beginning of the reading, proceed as follows:

 

Step 2: Search Password 

Disable the boot mode by unsoldering the resistances. Connect the pinout below.
Use the driver in foxflash software:
→ TOOLS BOOT MODE
→ INFINEON TRICORE Tool Password
→ OBD PASSWORD TPROT V11 KIA – HYUNDAI
→ Click on “Find Password” and follow the software messages.

Foxflash Read And Write Delphi MT86 9

Foxflash Read And Write Delphi MT86 1

Foxflash Read And Write Delphi MT86 2

Foxflash Read And Write Delphi MT86 4