Possible to read and write Ford Continental EMS2511 ECU with foxflash? by OBD or Bench?
Yes, fox flash ecu programmer will read EMS2511 via OBD, bench and boot mode.
OBD Mode: OK
Ford Focus 1.5T 180ch
ECU: Continental EMS2511
Conversion Flexfuel
OBD Reading
OBD Writing
Checksum Fox Flash.
Start up ok
Bench Mode: OK
bench read ok
bench write ok
Checksum by fox flash
bench pinout to Ford EMS2511
Boot Mode: OK
CONTINENTAL EMS2511 [ TC1791 INT.F.] – Ford
READ AND WRITE ECU
Connect with the multifunction cable the following pinout and the boot shown below
Use the driver:
→ TOOLS BOOT MODE
→ INFINEON TRICORE Boot
→ SAK TC1791
Also solder the grey wire to the other side of the ecu, see pciture below.
