What is the difference between CG FC200 and CG100X programmers? They are different programmers. FC200: used to read, write and clone engine ECU and transmission gearbox TCUs. FC-200 could be useful for BMW ISN from Ecu or maybe for some Ecu cloning. FC-200 supports most bosch ecus but has more pinout diagram for every ECU… Read More »
Problem: I tried to clone an ECU with CG FC200 programmer, but it asks for an authorization code, where to get this code? Solution: Users are required to connect network to access FC200 server to get the authorization code for checksum correction when doing ECU cloning.
Problem: My CG FC200 programmer shows the device activation time remains 26 days. But software subscription is still active. Solution: FC200 will activate (renew) every 30 days. When it counts to 0, it will automatically renew for another 30 days (MUST enable network connection to activate fc200 again).
Problem: I tried to read Alfa Romeo M10JA ecu via car OBD and foxflash failed to read. Solution: If failed to read M10JA ECU via OBD, read it in boot mode. MARELLI 10JA – FCA, Alfa Romeo boot pin (BAM connection) to foxflash To read and write use the following driver: ->TOOL BOOT ->TOOLS… Read More »
Volvo xc70 mk2 2.4t with b5244t3 engine, bosch me 7.0 ecu, foxflash read and write this ECU successfully in boot mode. BOSCH ME7.0 [ C167 ] – Volvo [ Gasoline ] boot pinout to foxflash To read and write use the following driver: → TOOLS BOOT MODE → SIEMENS-INFINEON C167 → Bosch – Flash… Read More »
As titled, will Foxflash do checksum correction automatically on Chrysler GPEC2 PCM? User reported: “It is a Gpec2a ECU from a 2016 Dodge Challenger. read it with foxflash just fine. Instead of sending it out to foxflash team. The user decided to modify the file himself. When I go to write it asks me… Read More »
FormulaFlash new user feedback from our WhatsApp group. 2013 Mercedes B class VGS FDCT transmission clone worked perfectly. Function Read eeprom Read flash Read ExtEEprom Read all Write eeprom Write flash Write ExtEEprom Write all FBS3 read all tools without problems but fbs4 no. www.iecutool.eu
It is a Hyundai Elantra 1.8 model. ECU type: Siemens Continental SIM2K-241 Device to read/write: Foxflash programmer Operation mode: boot mode ok Refuses to recode. Owner opted for immo off. Read boot ok Write boot ok. Success. CONTINENTAL SIM2K-241 [ TC1767 INT.F.] – Hyundai, Kia Boot mode pinout to foxflash STEP 1: Password Search Connect… Read More »
Problem: After installing software for FormulaFlash ECU/TCU programmer, the laptop does not detect the device. It says the device is not connected and also displayed unknown error. Error images are attached: Solution: 1.Make sure you have 12V power supply connected to the device. 2.Delete and reinstall driver on www.formulaflash.com website. 3. If no luck, change… Read More »
Foxflash read and write Ford Ranger year 2019 SID209 ECU in boot mode successfully. You have to read the password first, however obd does not work in writing but a big advantage is the reading is the same in obd and bench so no complications to deploy.
