Monthly Archives: October 2024

OBDSTAR DC706 Clone 2019 Charger TCM ZF 8HP45

OBDSTAR DC706 clone 2019 Dodge Charger transmission successfully. 2019 Charger TCM 8HP45. Cloned virgin tcm. Successfully cloned eeprom and flash. Now have a virgin file for this 8HP45. FC200 failed to clone the flash. DC706 did both Successfully! On this one the DC706 cloned the module and now I have that virgin file. I usually have… Read More »

Foxflash Write PSA EDC17C60 in Boot Mode

Foxflash will read and write PSA EDC17C60 on bench mode. Always have 13v+ on this type of ecu while writing. On some it works bench but others who have the update with code that blocks writing (see image below). In this case, we can write in boot mode. Read password in boot mode then change… Read More »

Foxflash Win7 Error Unable to Check Server?

Problem: How to solve this problem. after installing new Foxflash version 1.4.2 on windows 7? Error “Unable to Check Server”. I always use Windows 7, this happened after the update. Solution: This message will appear on Win7 system. On Win10 it does not appear. Some use it on Windows 7, getting this message for a… Read More »

Foxflash Read and Write Iveco EDC17CV41 on Bench

Foxflash read and write Iveco STRALIS EDC17CV41 ECU on bench successfully. To read and write use the following driver: → BENCH MODE → Iveco → TC1797 – Iveco → EDC17 CV41 Read ok, write ok Checksum by foxflash. EGR + DPF off.   Check pinout here http://www.pcmtuner.org/edc17cv41-pinouts-to-pcmtuner-and-foxflash/

Foxflash Failed to Read Audi EDC17CP14 via OBD Solution

Audi A6 2.0l tdi 2010 Possible to read and write with foxflash via obd? Tried to read via OBD but failed. It is written, bench or boot mode. 2010 has Tprot. Only bench mode to bypassing tprot. Bench write and read ok. Check bench pinout here http://www.pcmtuner.org/foxflash-read-and-write-audi-a4-2-0-edc17cp14-ecu/