CGDI FC200 ECU and TCU programmer released to V1.2.7.0 on April 29th, 2025. FC200 V1.2.7.0 New content: 1. Added the function of modifying VIN for some ECUs: (Bosch) BOSCH TC2xx: MD1CP001, MG1CS003, MD1CP002, MD1CS006, MG1CP002, MG1CS080, MD1CP004 SPC5777, MD1CP004_ TC298TP, MD1CS004, MG1CS001, MG1CS002 SPC5777, MG1CS002_ TC298TP, MG1CS111, MD1CP014, MG1CS008_ TC298TP, MG1CS016, MG1CS017, MG1CS018, MG1CS019,… Read More »
Problem: I failed to run the PADFlash programmer software; it says the driver was not found. I tried to install the driver manually, but the button is gray. The USB dongle was inserted into the laptop. How can I fix it? Solution: This laptop does not have a USB 2.0 port. There is a USB Hub in the… Read More »
FormulaFlash ECU and TCU programmer released a new software update on April 28th, 2025. No.1 IMPORTANT UPDATE Added Hyundai Kia ME17 series, MED17 series, MEG17 series EPROM read /write/CS &VIN modification. No.2 IMPORTANT UPDATE Added Delco’s E37/ E39/ E39A/ E67/ E78/ E87/ E98/ E92/ E80 /E83 power upgrade (stage 1) + idle speed… Read More »
As titled, here we will show how to extract pin code for Peugeot Citroen PSA Continental SID807EVO ECU from flash data. First of all, make a full backup reading of the Continental SID807EVO ECU in boot mode. Using ktag/kess3, Foxflash, Xhorse Multi Prog, Flex or other programmers in boot. If use Foxflash, check the… Read More »
Problem 1: Got the PADFlash programmer software installed on a Win8 64bit system, Windows detects the device driver, click Activate, but padflash software did not start. Any solution? Solution: PADFlash software cannot be installed on Windows 8 operating system. Only Win7 64bit or Win10 64bit system. Win7 64bit is the most stable system for padflash.… Read More »
Possible to read Mercedes Benz ME9.7 ECU with Xhorse Multi Prog? Need to clone the ECU. Multi prog will read and write Benz ME9.7 ECU via OBD mode. Multiprog reads only maps in obd mode, no immo or full read, so it cannot be used to clone this ECU. Use other programmers if you want… Read More »
Formula Flash is a professional ECU tuning tool that supports: ECU/TCU data reading and writing for common models Immo OFF Power upgrades DTC OFF VIN modification These are the most frequently asked questions and key functions of the FormulaFlash. What are the advantages of FormulaFlash? Combining 10 years of industry expertise with innovative… Read More »
Problem: Had a problem with PADFlash programmer software. Cannot select drivers, all buttons are gray. Possible reasons and solutions: 1. Operating system. Better load software on a clean Win7 64bit system. 2. Administrator privileges. Grant the computer administrator highest privileges. If the problem still exists, contact www.iecutool.eu customer service to address the problem via… Read More »
Problem: Failed to start PADFlash programmer software after activation. It reported an error “Download Limit Exceeded”. How to fix it? Solution: He has downloaded too many times and exceeded the limit. It will be restored automatically after 24 hours. Then try again after 24 hours. www.iecutool.eu
Foxflash programmer’s new feedback: It is a dcm3.7 vw ecu, the customer had modifications done by a friend and he thought it was lighter. After opening the ecu I found that Inductor to jump on the lines CAN H / CAN L. Reading diagnostic suitcase with godiag. Foxflash read ID via OBD with godiag ECU… Read More »
