Foxflash programmer read and write Ford transit 2008 visteon dcu101 ecu successfully. -OBD Read Write tables only 5-10min👍 -Checksum manually. -EGR OFF. Everything works fine. Didnt have battery charger with me but customer had old w124 200 diesel which worked as charger with jumper cables when flashing file.
Hyundai Continental ECM+TCM SIM2K-250 read + write with OBDSTAR DC706 programmer by boot successfully. First attempt: Tried by bench using P004 adapter but can’t read or write SIM2K-250 and get a message / ecu does not support this function. Second attempt: Tried by boot using MP001 programmer. read and write ECM +TCM successfully, 20… Read More »
Problem: PADFlash software starts fine, but cannot see the manual and wiring diagram. Any idea? Solution: Manuals are in the Updater. How to Check Wiring Diagram? Run PADFlash Updater tool. Press Search function. Enter ECU and Search. You will see instruction and wiring diagram pinouts.
OBDSTAR DC706 read and write Fiat ME7.9.10 ECU on bench successfully. bench ( k-line) with P004 adapter. Read write flash ok. Read write eeprom ok. int flash checksum correction by DC706. Immo off in device. No need 3rd party tool or software.
The FormulaFlash ECU data service system is online now. Step 1: Click “User Center” to access ECU data service system. Step 2: After completing “User Registration” and “Device Binding“, you can enter the DTC OFF interface. Currently, DTC OFF is free and will soon update the “DPF/GPF/OPF/EGR/EVAP/Adblue” database for free. Step 3: If you encounter… Read More »
Problem: I have a CG FC200 programmer and I am facing this problem. It keeps saying failed to open the device. How to fix it? Solution: Unplug the power supply and try again. If it is not working, device is dead, you have sent it to factory and they will replace hardware.
Foxflash will read and write Opel Insignia 2.0cdti Bosch EDC17C19 ECU in both bench and boot mode. Bench mode To read and write use the following driver: → BENCH TRICORE → OPEL → TC1796 – OPEL → EDC17 C19 bench pinout to EDC17 C19 If cannot read ecu on bench mode, try boot mode.… Read More »
It’s a Chrysler 300C V8 5.7. With Continental GPEC2A ECU. Foxflash read and write no problem in boot mode. Checksum by foxflash. HEMI 363HP/534Nm 2018 Stage 1 385/560Nm, Vmax OFF and OBD Unlock to be tuned in the future HPtuners. Images attached:
Thanks to the Alientech KESS3 exclusive update, you can now work in BOOT mode on CNG vehicles from major Chinese manufacturers, equipped with a 7.8L engine and Yuchai EECU, produced since 2023. A fast-growing segment in urban and regional transport, where reliability and service continuity are essential. Work on the bench with direct access to… Read More »
FormulaFlash programmer update new DTC off database on June 18th, 2025. UPDATED JUNE 19, 2025 VERSION: 1.0.4.0 ECU DATA CLOUD PROCESSING PLATFORM DTC OFF DATABASE UPDATE UPDATE CONTENT: GM ACDELCO SERIES (FULL COVERAGE): E98, E87, E84, E83, E82, E80, E78, E67, E39A GEN2, E39A GEN1, E39 GEN1, E39 GEN2, E38, E37 VOLKSWAGEN/AUDI/PORSCHE SIMOS SERIES: SIMOS… Read More »
