CGDI FC200 ECU and TCU programmer released to V1.2.7.0 on April 29th, 2025.
FC200 V1.2.7.0
New content:
1. Added the function of modifying VIN for some ECUs:
(Bosch) BOSCH TC2xx: MD1CP001, MG1CS003, MD1CP002, MD1CS006, MG1CP002, MG1CS080, MD1CP004 SPC5777, MD1CP004_ TC298TP,
MD1CS004, MG1CS001, MG1CS002 SPC5777, MG1CS002_ TC298TP, MG1CS111, MD1CP014, MG1CS008_ TC298TP,
MG1CS016, MG1CS017, MG1CS018, MG1CS019, MG1CS032, MG1CS026, MG1CS024, MG1CS201, MD1CS001, MG1CA007
(Bosch) BOSCH TC17xx: EDC17U01, EDC17U05, ME17.5.20, MED17.1.61, EDC17CP74, ME17.7.8, EDC17CP06, EDC17CP16, DCU17PC42, EDC17CP58,
MED17.6.9, EDC17CP68, EDC17C61, EDC17C47, ME17.8.31, ME17.8.32, EDC17CP05_ TC1797,
EDC17CP05 TC1796, ME17.8.3.3, ME17.8.33, ME17.8.5, M17.8.7
(Bosch) BOSCH MPC 5xx: MED9.1, ME9.0, EDC16CP31, EDC16CP35, EDC16U31, EDC16C2, EDC16C1, EDC16U31, ME9.1.1, MED9.1.1, MED9.1.2
(Bosch) BOSCH ST10xx: ME7.7.0, ME7.9.9, ME7.1.1, ME7.8.2, ME7.6.4
(Continental/Siemens) CONTINENTAL/Siemens: SIM271KE, SIM271DE, SDI7, SDI6.1, SIMOS8.4x, SID208, SID310, EMS3110, EMS2511, EMS24xx,
GPEC3, GPEC2A, GPEC4, GPEC4LM, GPEC2
(Denso) DENSO: MB279700-9500, MB279700-9811, MB279700-9801, MB279700-96xx, RF7x, RF8x, 33920-67P0, R2xx, Pxxx, S5xx,
SHxx, 275700_7082, RA6, 4N14, 23740_5Sxxx_Gen2, 23740-5Sxxx_Gen2, 23740-3Nxxx_Gen1, Subaru SH72531, 112800 SH72531
(GM) GM: E38, E39, E39A, E78, E80, E83, E98, E84
(Hyundai/Kia) Hyundai/Kia: SIM2K_240_ECU, SIM2K_241_ECU, SIM2K_240R_ECU
(Mitsubishi) Mitsubishi: E6T6xxxx, E6TAxxxx
(Delphi) DELPHI: DCM3.7AP, DCM3.5
(Marelli) Marelli: 8TDW
2. Added the function of repairing “Three readiness monitors not ready” for some ECUs:
Peugeot/Citroen: MED17.4.2 TC1767, MED17.4.2_ TC1797, MED17.4.4, MEV17.4, MEVD17.4.4, MEV17.4.2 TC1766, MEV17.4.2_ TC1767
Maserati: MED17.3.4, MED17.3.5
Smart: ME7.7.0
BMW: ME17.2.1
3. ME17.8.8 added CALID function
4. Dongfanghong EDC17CV54 time repair
5. Jiangling EDC17C55 mileage repair
6. Added Volkswagen MG1CA811
