Foxflash Audi MED9.1 OBD Car Not Start Solution

By | October 15, 2024

Problem:
Foxflash read and write Audi MED9.1 via OBD successfully. But after flash and 5 or 6 starts, unable to start. Any solution?

Foxflash Audi Med9

Possible reason:
Checksum problem.

 

 

Solution:

Modify checksum manually.

FYI: Better do it on bench mode cause this ECU is not easy to find.  Bench mode is safer.

check pinout here

http://www.pcmtuner.org/foxflash-read-vw-med9-1-ecu-on-bench/

 

User feedback:

Bad checksum,  modified checksum with winols and work perfectly.

 

www.iecutool.eu