Finally managed to read and write Volvo Visteon ESU-413 with foxflash programmer via jtag mode.
Have tried numerous times with another ecu without luck but that mcu must be completely dead/bricked.
So just to let every one know, it’s possible to read/write Volvo ESU-413 with foxflash even tho i’ve seen posts about it’s being impossible.
Use bdm/jtag mpc5xx protocol and use esu-411 Ford pinout.
Seems that all the ESU-41x share same flash.
VISTEON ESU-411 – FORD Jtag pinout
To read and write use the following driver:
→ BDM/ JTAG MODE
→ BDM MPC
→ MPC55x/56x
