PCMTuner Failed to Read Kia EDC17CP14 on Bench?

Problem:

Any way to read the edc17cp14 kia with pcmtuner in bench mode with 71 module. I test many ecu but no results.

Solution:

First edc17cp14 pinout is for Hyundai/Kia. Do not try read until ID successful, need 14v.

Tprot must not be TRPOT3 or TPROT11- if so need do OBD.

If failed to read it with module 71, then try read by OBD.

If it can read by OBD, then ecu TPROT is to high for bench mode.

You can do obd it work but takes more than 2 hours.

or read by foxflash on bench.

foxflash Hyundai Kia EDC17CP14 pinout

To read and write use the following driver:
→ BENCH TRICORE
→ HYUNDAI / KIA
→ TC1796 – HYUNDAI KIA
→ EDC17 CP14