How to Install PCMTuner ECU Tuning Tool Software?
Pcmtuner Software Installation Guide:
Preparation before installation:
1 Connect the device to the computer with power cable and USB cable, and plug the smart usb dongle into computer, like what we show you here.
2 Close all anti-virus software and firewall on the computer (the system firewall should also be closed. According to the system and software, Google how to close it if you don’t know
how to handle.)
3 Go to http://tuner-box.com and download Pcmtuner tool latest software
Note:if you have already installed the pcmtuner software, the latest software can be updated online. Don’t update pcmflash software.
Like this check below picture
4 unzip the downloaded software check below
5 then you will get 3 files like below
you need read the notice before start install all software
Then click PCM_Setup run it like below
Click here
Click here
Accept license agreement
Then next till display below picture, but don’t run it, unselect the run software
Notice, never select lauch software
Continue click here
Till happen this
When you see below things happen,that’s mean you already completely install tool software
Pls read the carefully what the software tell you
When you finish install, then run PCMtuner software
And register it like below
When registering, pls contact www.iecutool.com to help you active it, stand by 24 hours for activation.
When we help you active it pls check like below