Good news! Foxflash ecu programmer released new update- adding FCA group GPEC2 GPEC3 GPEC4LM GPEC2A ECUs. Continental GPEC2 GPEC3 GPEC4LM GPEC2A – foxFlash is now able to perform the Continental GPEC2 GPEC3 GPEC4LM GPEC2A foxFlash is now able to perform the following operations: Boot Read Boot Write On the following ECU reference:… Read More »
OBD on the bench reading the MEDC17.9 with foxflash programmer+ godiag gt100 breakout box. I want to try and write the modified files via OBD after an OBD read. The ECU data that had been corrupted is now all OK. Updated: I have had an interesting case with this ECU MEDC17.9 that had failed… Read More »
Problem: I had issues with FoxFlash software clicking midway through reading and kicking you off. It did it a few times on the last ECU I read but just thought it may be a connection issue & managed to read ok. It’s doing exactly the same thing again. I’ve tried 3 different Power Supplies. Also tried… Read More »
After getting multiple failures on the bench due to the very tiny CAN-H and CAN-L pins on the Mazda CX-5 Denso SH13 ECU, I opted for OBD (on the bench) using the Godiag GT100 breakout box and I’ve managed to read the full flash with foxflash programmer, though it is much slower than on the… Read More »
Will foxflash programmer read and write VAG Delphi DCM6.2 ECU via OBD? my kt200 doesn’t work. Yes, fox flash read and write DCM6.2 via OBD without issue. This ECU needs high voltage. At least 13.5v on car System! Only in car with immo! For example: VW Transporter T6 2.0tdi Delphi dcm6.2 read, ID, VR read,… Read More »
Problem: Foxflash reads Renault SID310 ok but Impossible to write sid 310 via OBD (Error SK2, Error Silentkey). Any solution? Solution: Start the engine and let it idle for 10 minutes, then it will allow you to write. If you turned it on, try to leave it for 10 minutes ONLY with the ignition on.… Read More »
Problem: Can anyone help me out with the foxflash software? Download keeps getting stuck. An error occurred while trying to download file. Solution: Internet issue or server busy. Feedback: It was network issue (WiFi problem). Now it is ok.
2012 Land rover Discovery 4 (EDC17CP11) successfully read, DPF and EGR delete, checksum by FoxFlash. All OK. Here’s the bench pinout to Land rover EDC17CP11 To read and write use the following driver: → BENCH TRICORE → LAND ROVER → TC1796 – Land Rover → EDC17 CP11 Read OK. Write OK. Car starts fine.
Most ask if foxflash ecu programmer will read and write PSA DCM7.1B ECU? Yes, foxflash does it without problem, the checksum is made by the tool. How to read and write DCM7.1b with fox flash? NEW BOOT MODE FOR DELPHI ECU DCM7.1A / DCM7.1B BOOT MODE for micro AURIX TC297 mounted on DCM7.1A and… Read More »
Foxflash ecu programmer released new update on March, 3rd, 2023. Adds following Ducati ECUs. Ducati install Bosch ME17.9.21 can easy Read&Write now foxFlash is now able to perform the following operations: Bench Read Bench Write Boot Read Boot Write On the following ECU: Bosch ME17.9.21 Vehicles concerned: Ducati 1.198 150hp Support BENCH and BOOT option Update method: Run the foxFlash Manager software, and click the download button till all is done.
