Monthly Archives: May 2023
Foxflash Failed to Clone Land rover MEDC17.9 ECU?
Foxflash Read and Write BMW S7 G12 MD1CP002
Fetrotech PSA MD1CS003 Car Not Start?
Problem: Today i read and wrote md1cs003 adblue off using fetrotech tool. cheksum with fetrotech Car started 3 times and then it wouldn’t start And dtc ecu P3028 What To do? Solution: TPROT off needed for PSA MD1CS003. Make Tprot off. How to do tprot on this ECU? At the address: 0x2A5D40 2D 0F 00… Read More »
Foxflash Failed to Read Suzuki Denso 64F7055 ECU?
Problem: I have a problem reading Denso suzuki swift 1.3 Denso 64F7055 full system. I use pinout by foxflash. Do i do somethingh wrong? Here is the clue. Disconnect from ecu, USB and POWER. Resrart computer if you made many attempts. Switch off MFC, try 13.5v. Reconnect and ensure all connects to ecu are firmly… Read More »
Foxflash Cannot Save File on Disk C Solution
Problem: Why I can’t save file on disk :C after reading beacause foxflash software stop? If choose disk 😀 is ok. I have one more question, When connect the power supply to foxflash and when connect the power supply to bench box? Solution: 1. Windows permissions. Try save to documents folder or other public folder… Read More »
Foxflash Failed to Read Fiat MJD 8F on Bench Solution
Problem: I failed to read Fiat Ducato Marelli MJD 8F IAW ecu with the foxflash programmer on bench. It reads ID but failed to read data (error boot1). Any advice? Solution: Foxflash will read and write Marelli MJD8F full system. It will read the whole backup. DON’T CONNECT BENCH BOX WHEN READ THIS ECU. You… Read More »
New KT200 An Error Occurred When Download File Solution
Problem: I have a problem with my new KT200 programmer. Run KT manage, but software failed to start. It gave me errors below: Solution: Most of the case is the operating system issue. Change a Windows 10 64-bit system laptop. 1 Shutdown date and time automatically syncs 2: shutdown defender 3: shutdown antivirus system 4:… Read More »
Foxflash Pinout to Hyundai Kia SIM2K-341
Can foxflash read tc1738 in Hyundai sim2k-341? Yes, read in BDM/Jtag mode. Foxflash pinout to Siemens SIM2K-341 – Kia [MPCZ561 ECU] Connect multifunction cable as follows: Solder the dip/sip connectors on the pcb: Insert Siemens/Marelli adapter as in photo: To read and write use the following driver: → BDM/ JTAG MODE → BDM MPC… Read More »