Problem: I failed to read and write Fiat Marelli MJD 6JF ECU with your new KT200 (KTM200) ecu programmer (the same as foxflash) on bench. Wiring is the same as the document. How to fix it?Images attached: Solution: KT200 will read and write Marelli 6f3 full system, read eeprom too. You’ve got 2 pinouts. Try… Read More »
Foxflash ecu master tool read and write Jeep Cherokee TCU ZF 9HP transmission gearbox TCU successfully. ZF 9HP – FCA-FIAT/JEEP/CHRYSLER Pinout to Foxflash Set up 9HP gearbox with fox flash in BDM Select driver Jeep Gear->Cherokee->ZF 9HP48 TC1782 Boot Tricore Read all (full flash and eeprom) in boot.
Foxflash ecu master tool read and write EDC16C3 PSA 1.4 HDI by OBD, Checksum ok by the tool, the vehicle starts ok. OBD just read flash data. Reading 6 minutes, writing 1.22 minutes. Image attached: If need to read/write both eeprom and flash, you need to read it on bench. BOSCH EDC16 C3 [ MPC556… Read More »
Problem: Error micro not recognized when reading Volvo SIEMENS SID803 ECU using foxflash programmer. In BDM mode it does not go. Any solution? Solution: The power supply (12v) which came in the box will not help you with this ecu. Use a lab power supply. Had this problem with the power supply from the box… Read More »
Situation 1: I had an error with foxflash software. It cannot find dbf2xx.dll, re-install this application Solution: For 64bit system, Press “Install driver” to install driver. For 32bit system, driver is not installed completely. Go to FoxFlash/DFBTech_DRIVER/amd64 folder, copy and paste all files in this folder to C:/Windows/SysWOW64 folder Better install software on 64bit system. Situation 2:… Read More »
Foxflash will unlock VAG Simos PCR2.1 ECU by OBD, bench and tricore boot mode. Here is the instruction on PCR2.1 unlocking by OBD. Get Identify, and get an Ori, modify Ori and during write tool applies Patch. Function requires network connection. First, read by obd using unlock obd protocol. Fox flash will give you a… Read More »
Problem: I can’t turn on my foxflash software, after press Activate nothing opens. Maybe someone knows what is the publisher unknown problem? Solution: In windows make sure automatic time sync is off. Plug in foxflash device+power and check windows device manager that device shows as installed. Open manager and click active, do not close manager,… Read More »
Problem: Foxflash read Citroen 2018 ok but when try to write and says error unlock password. How can i do to unlock? Solution: You dont, this ECU has new Trot, probably dealer update, the password cannot be read for bench, you could try Tricore password and BSL. Have to open ecu and do in boot mode.… Read More »
Problem: I am trying to read and write this BMW MG1CS003 ECU with Foxflash. Tried to write modify file, and failed, then tried to write original file, failed at the same place. Also tried with voltage v13.4 and failed. iECUTOOL Technican Solution: New ECU’s have clever Voltage protection, during diagnostics or programming voltage is expected… Read More »
Here goes the problem: I gave power to the programmer from both sides to make it damaged, and now it has no communication with the laptop. Is it possible to fix this FoxFlash? There is no visible damage on the board. Here iecutool tech shares the Possible Solution: Step 1 Check if computer identifies device Connect Foxflash Tool… Read More »
