Problem: I got the foxflash software installed but failed to start Foxflash Manager app. Error “The application was unable to start correctly” Solution: Missing patch on Windows 7 system. following patches dependant on your windows environment. For both Win7 32bit and 64bit. Win7 patches Windows6.1-KB2992611-x86.msu
Problem: My foxflash software is not working on Win7 operating system, unable to connect to server. Any solution? Solution: Restart computer, check Windows data time sync it off. Make sure netframework is installed. If win7 system, install service package patch (search on our blog). If all failed, change win10 64bit system.
Problem: I’m trying to read for the first time a Smart Edc16c32 with foxflash but i don’t have an option to read eeprom and i need to clone the ecu. Can anyone help me? Solution: Mercedes/Smart Edc16c32 do not have Eeprom, they have what is known as an Emulated Eprom (in flash memory). only need… Read More »
Question: do you use bdm adapters from ktag fg? adapters from ktag are not compatible? If we can change the bdm adapters to avoid welding. Can ktag bdms be used with bdm support? Where are there other bdm without soldering for foxflash? Answer: just wait us, iecutool.com is releasing foxflash BDM adapters soon. You… Read More »
What’s Fetrotech SEIKOTOOL ECU Extractor? Fetrotech seikotool ECU cover extractor is designed for ECU worker and chiptuner. It helps to remove/ install car ECU module cover easily. Fetrotech seikotool ECU cover extractor is a useful tool for opening the ECU. Fetrotech seikotool ECU cover extractor works perfectly with ECU tunning tools MPM, Fetrotech, PCMTuner, Foxflash, Autotuner,… Read More »
If failed to read and write BMW EDC17CP02 ECU with Foxflash programmer, here is the solution. Solution: Repin ecu with alternate pinout (2 types), switch OFF MFC until commanded by software to switch on…the message is just an instruction. This bench pinout was tested working fine. Feedback: Bmw Edc17cp02 or c06/cp06 read on bench dpf… Read More »
Foxflash read WV POLO 1.6TDI 105 ECU PCR2.1 VR files via OBD, EGR Off, Checksum automatically. Write with OBD. ECU unlock by VR flash automatic. Read file, Write file, when write ECU will be unlocked. Attention: Read manual file for flashing by obd, need disconnect battery and etc. Vehicle start without problem. Working Fine. … Read More »
Problem: I just received my Foxflash programmer today. and i have already installed the program on windows 10. But this problem happened to me. Can anyone help me with this problem? Error Valud of 25/9/2022 is not valid for “Value”. Cannot select driver. Solution: This is a software installation error. Windows date&time make sure automatic… Read More »
I need to do a Fiat Freemont with EDC17C49 EGR off. It is done by foxflash on windows 10 ssd 16gb ram. Read (5 minute) write(50 seconds) checksum (lsuite) There are 4 connection modes for EDC17C49. If it does not enter bench mode, add ground to pin 44: On some EDC17C49 FCA the CAN line… Read More »
Did anyone test Fiat FCA Marelli MJD9F ECU with Foxflash ecu programmer? Yes, both OBD and Bench mode work fine. OBD mode: OK Read and write over obd works good. Magneti marelli 9df reading two hours, write 5 minutes. *HW001 obd Hw002 boot, 5 minutes of work with opening the computer, FoxFlash… Read More »
