One of our customers reported that he got ‘unable to connect to remote server’ after installing foxflash software on Windows 10 system (image attached). Ieutool.com engineer check the issue via Teamviewer and found it was the system issue. Need to install foxflash software on a clean Windows 10 system. NET framework version is too low.… Read More »
Problem: I got the foxflash software and manager well installed, but get this error after installation. Error “An internal exception occurred”. Any idea? Solution: If someone get this error after installation, please reintstall your windows to windows 10 without updates, then install visual ++ 2015, then it will work. www.iecutool.com
Foxflash new user feedback: Adblue off on a Citroen c3 Aircross 2022 MD1CS003 ECU is not locked. -read ID ok -read on bench with foxflash -Checksum correction with foxflash -Write on bench with foxflash
Foxflash new user feedback: BMW F10 Continental MSD87. 1 TC1796 PASSWORD SEARCH successfully Using the OTB adapter Protocol: Tool Boot mode->Infineon Tricore Tool Password->OBD Password MSD80/81/85/87 BMW OTB pinout is in the foxflash document.
Foxflash new user feedback: Mini One 1.6 Gasoline Just get ECU Siemens EMS5150 not car Read ok with OTB 1.0 adapter Write ok with OTB 1.0 adapter E85 Checksum by WinOls All perfect. OBD on bench pinout is on the document.
Foxflash failed to read Jeep 2021 EDC17C69 TC1793 ECU on bench. Error SK2 Bench locked. 2021 have tprot. Not possible read by aftermarket tools. Foxflash cannot read it as bench locked. Bench mode uses a security exploit in Firmware to gain access to bootloader on processor, after 2020 most manufacturers update ECU firmware so exploit… Read More »
Problem: Foxflash reads Jaguar ECU Edc17cp11 with no problem, when write ECU it gave an error. Any idea? Solution: It says on the program, use higher voltage. 13volts minimum. That stock power dc not enough. Recommend buying lab power supply. www.iecutool.com
Foxflash new user feedback: Winters been tough for adblue systems. Mercedes w639 vito for adblue off ECU: Edc17c66 cr41.60 0281031244 Read on bench Write on bench Checksum by foxflash
If your foxflash tool is not detected by computer, saying ‘USB device not recognized’ (image attached), you might need to change another USB port or change laptop.
Foxflash new feedback: Fiat marelli MJD 8F2 ECU. Read ID ok read bench ok write bench ok Checksum done by the mapper but Fox I’m doing it without worries I’ve done it several times.
