Will foxflash read and write PSA edc16c3 ecu? on bench or by BDM mode?
Bench mode:
BOSCH EDC16 C3 [ MPC556 ] – Citroen, Peugeot [Diesel]
Connect the multifunction cable as follows, use the Bench Box:
Set the resistance of 1000 ohms that starts from the bench to the brown wire and after mounting the brown on the ECU
To read and write use the following driver:
→ BENCH MODE
→ [brand]
→ MPC555/6 – [brand]
→ EDC16 C3
If failed to read it on bench, read it by BDM.
Foxflash BDM mode is not a problem.
Here is the BDM setup example:
