Foxflash Not Start Only Show USB Serial to Converter DIY Repair

By | June 19, 2023

Recently some users reported they cannot start foxflash software. The usb device does not show as “Dfox” but “USB to serial converter”.

Like we said in this post, in most cases the “version.dll” file in dfb folder has been eaten by the anti-virus program. Downloading this file will solve the problem.

 

Here is another DIY solution from one of the fox users. Free to test by your side.

 

Just sharing for purpose. Credit to SonyPS3 from DK forum. You are at your risk because this solution uses kt200 program. iecutool.com don’t hold responsibility for the damage.

 

Foxflash FTDI-blank repair:

He writes with Mprog ftdi from old FGtechGalleto V54 and then repair it with FoxFlash activation program.

It is solved in several steps.
For starters, we’re using FGtech’s .ept file
After the last step, launch FoxFlash.

 

Disable anti-virus before downloading programs.

Download Link

including:

Mprog

V54

Foxflash ftdi repair

 

1.Run Mprog

Repair Foxflash Ftdi Blank 1

2.Only shows USB serial converter in Computer device manager

Repair Foxflash Ftdi Blank 2

3. Upload V54.ept file in V54 folder

Repair Foxflash Ftdi Blank 3

4. Press this icon

Repair Foxflash Ftdi Blank 4

5. Write EEPROM and reboot the device

Repair Foxflash Ftdi Blank 5

6. Install KT200, turn off the anti-virus program.

kt200 online setup software

Repair Foxflash Ftdi Blank 6

7. Update the driver from the program directory

Repair Foxflash Ftdi Blank 7

8.Plug foxflash and start the kt200 service

Repair Foxflash Ftdi Blank 8

9. Reset Device

Repair Foxflash Ftdi Blank 9

10. Device is detected.

Repair Foxflash Ftdi Blank 10

11. Launch foxflash.