Foxflash user feedback: Fiat ducato 2016 Marelli 8f3 Bench reading (full system) by foxflash Checksum fox Writing bench (full system) by foxflash

Foxflash user feedback: Mercedes Benz Vito W638 EDC15C0 CR1.7 Stage 1 + EGR off Foxflash OTB mode Read ID ok Read ECU ok Write ECU ok   Connect OTB adapter with Foxflash as image below. OTB adapter served me well, no standard OBD plug on the vehicle

Can I get a little short cable to replace this Mini Gender charger adapter for foxflash? It’s called db15 male to female cable. You can use a db15 male-to-female cable to replace the adapter. The cable can be found on ebay or amazon. Connection example: Disclaimer: We don’t hold the responsibility for the damage.

Problem: SID206 Volvo v50. Foxflash failed to read this ECU via OBD. Any solution? Solution: It is Sid803A ECU. Volvo upto 2009 don’t have K-Line in OBD so it will always fail Its obd By CAN on old Volvos. Old volvo Sid803 and you have to remove ECU. Use full system on bench no need… Read More »

Foxflash user feedback: Renault Scenic 2017 DPF OFF Boot Mode SID310 Read Password Ok Read Flash Ok Write Flash MOD and checksum ok! Was able to read by OBD,Flash and Password, but it failed start to write, had to do it Boot Mode. No harm done to ECU. Done. Check boot pinout here http://www.pcmtuner.org/read-renault-sid310-with-foxflash-in-boot-mode/

Foxflash user feedback: Ssangyong New Actyon dpf egr off Delphi DCM 6.2 AP Boot mode Read ok Write ok Checksum by foxflash DELPHI DCM6.2 BAM Connection- SSangyong Connect multifunction cable as follows: Solder 1 link on the pcb: To read and write use the following driver: www.iecutool.com

Problem: In the past I purchased a FoxFlash Programmer but I sold the programmer to a person a long time ago and I was forced to give him my email to be able to use it, so my question is Is it possible to change the email address on an instrument in which an e-mail… Read More »