Foxflash new test report: Continental MSD81.2 DTC Off, Lambda Off, via OBD on Bench Read ok Write OK Checksum by foxflash. ECU removed from the car with pinout like the OBD connection powered from an external source, without the bench box…….some people say that this connection is for the bench, others say that as long as… Read More »
Foxflash new test report: Simos 8.10 boot read and write all fine with foxflash tool. Do not get a heart attack while flashing the ecu takes Power down and up. SIEMENS SIMOS 8.10 [ TC1796 INT.F.] – Audi Read and write ECU Connect with the multifunction cable the following pinout and the boot shown below. Use… Read More »
Foxflash new test report: Dcm 6.2A Peugeot expert adblue off -foxflash read obd ok -Remise reset zero diagbox before writing – foxflash OBD write ok, less than 5 minutes -Checksum by foxflash ok -14v battery charger www.iecutool.com
Problem: After update, foxflash asks to register device again. After input device ID and email, it says ‘User successfully created’. How to fix it? Solution: Close this interface. Run Foxflash manager and register with device S/N again.
Foxflash new feedback: Kia rio 1.1 crdi 2013 dcm3.7 ecu -Foxflash obd read ok – foxflash obd wite ok -Checksum by foxflash ok -Battery charger set to 14v
Foxflash new user feedback: Golf 7 Gti Performance Simos 18.1 Unlock/Finding password ok Write/Read ok Checksum ok It is more time consuming because foxflash doesn’t support obd on this ecu. if VR not there for you car , you have to do boot. But it gets job done really well.
What’s Foxflash OTB Adapter? The OTB1.0 adapter is suitable for foxFlash extended application engine and transmission computers, and is also suitable for ACM and DCM computer modules. Supported functions: 1: Dual-channel high-speed CAN 2: Three-way BOOT 3: Dual VCC power supply 4: GPT encryption and decryption function 5: Adaptive resistance 6: Adaptive CNF signal adjustment… Read More »
Peugeot 3008gt 2018 2.0 blue HDi ECU Dcm 6.2a FAP off scr off start stop off Obd read by foxflash Obd write by foxflash. Checksum ok. foxflash work well.
Foxflash another new feedback from Mr. Cornel Grijincu. Mercedes Benz Vito 2016 EDC17C66 read on bench write on bench Checksum by foxflash Bench pinout to EDC17C66 To read and write use the following driver: → BENCH TRICORE → MERCEDES → TC1793 – MERCEDES → EDC17 C66 www.iecutool.com
Some users reported they had problems downloading the latest foxflash 1.3.8 update. iECUTool.com collects some common problems and solutions. Problem 1: ‘An error occured while trying to download file’ trying to install it but getting this error, I tried with two different laptops. Solution: The foxflash manager version is tool old. Delete current manager, and… Read More »
