Foxflash new test feedback: A Little late night Chevrolet Delco E78 ECU cloning and vin swapping. Read and write successfully using foxflash. Chevrolet Delco ECUs 1.2-1.4 16V Delco E78 Full System *CAN Here is the GM Delco E78 ECU bench pinout Read and write ok
Iveco edc7uc31 truck ecu read and write successfully with foxflash. BOSCH EDC7 UC31 [ MPC561/2 ] [Diesel] pinout to foxflash Connect the multifunction cable as follows, use the Bench Box and the D48CONN04 adapters: To read and write use the following driver: → BENCH MODE → [brand] → MPC561 – [brand] → EDC7 UC31 … Read More »
Question: How to read and write Volkswagen EDC15P+ with foxflash? I can’t find a driver for it. Answer: Seat Arosa Bosch EDC15P+ OBD BENCH BOOT Ford Galaxy Bosch EDC15P+ OBD BENCH BOOT any of them can do, better use bench read and write for safe, you also can do bench full backup, then… Read More »
Question: Is it possible to read/write peugeot sid801A ecu eeprom with foxflash software? I can’t find sid801a ecu on the ecu list. Only sid801 is available, but inside sid801 is different 2 board showing on the picture on sid801A only 1 board. Answer: Yes, foxflash will read and write SID801A ecu. Tested by many. no… Read More »
Foxflash programmer released new software update on September, 14th, 2023. Small update for checksum fix September 14, 2023 Update checksum for mcu TC1766 TC1793 TC1797 TC1724F TC1767 foxFlash is now able to perform the following operations: software calculate checksum On the following ECU reference: Audi Bosch MED17.5 TC1766 Audi Bosch MED17.5.5 TC1766 Audi Bosch… Read More »
Problem: edc16u31 bricked while cloning with foxflash, was cloning in bench after writing intFl ecu bricked, now no connection thru jtag. i am wrong? Solution: You’re doing it wrong, supply power through the board to the BDM pins. You can ktag bdm, but fox flash also does it well via bdm, only the power must… Read More »
Here is the foxflash tool user feedback on 76F00XX BDM full read and write with 14V better supply. * Denso NEC76F0038AGD 175822-762 Toyota * Denso NEC76F0038AGD 175822-773X Toyota * Denso NEC76F0038AGD 175822-887 Toyota * Denso NEC76F0038AGD 211941-37900830 Toyota * Denso NEC76F0038AGD 211941-37910830 Toyota * Denso NEC76F0038AGD 275036-1152 Toyota * Denso NEC76F0038AGD 275036-2110 Toyota *… Read More »
Problem: I have problem with opel delco e98. I write eeprom with foxflash. and after that ecu no communication. Id make but can’t write backup. reading error wrong file dimension. Solution: Wrong file selected. You read flash but write backup. Select flash and write flash. If still gives error when write flash, check wiring diagram… Read More »
Foxflash ECU/TCU programmer released new software update on Sept. 6th, 2023. BMW MINI BENCH BOOT READ & WRITE September 06, 2023 BMW INSTALL Bosch MEVD17.2.7 Bench read/write foxFlash is now able to perform the following operations: Bench Read Bench Write Boot Read Boot Write On the following ECU reference: Bosch MEVD17.2.7 BMW … Read More »
Problem: Hi. Fetrotech tool has Error key. What is the problem? Follow all step by step to install the new Fetrotech software. Key install already. Any solution? Solution: The error key was caused by the wrong activation key input. Double-check if the key file inputted is correct, then replace the file again. Copy and paste… Read More »
