How to understand the logic ECU manufacturers use? Bosch ECU references October 27, 2023 If you are new to the field of engine reprogramming, you have surely quickly had to familiarize yourself with the specific terms of this industry. To assess the feasibility and complexity of modifying an engine, it is essential to refer to the… Read More »
Some users reported that foxflash failed to read Mercedes/Chrysler Siemens EGS52 or EGS53 TCU. They can see it in the menu, but unable to read? Foxflash will read/write EGS52/EGS53 in boot mode if ECU is not encrypted. If you fail to read EGS52/EGS53 in boot mode, make sure you don’t connect the bench box… Read More »
User feedback: Mercedes Benz W212 500 V8 with ECU MED17.7.3.1 read/write goes well using foxflash. To read and write use the following driver: → BENCH TRICORE → MERCEDES → TC1797 – MERCEDES → MED17.7.3.1 BOSCH MED17.7.3.1 [ 1797 + EXT.F. ] – Mercedes Benz [Gasoline] pinout
Problem: New KT200/Foxflash keeps getting this message when I try to write it to the replacement DME VW MED17.1. When I try to write Ori file on used junkyard ecu I have this error: “uncorrect file 01000 – OTP sector not writeble.” Any solution? Solution: The ecu file needs to be cloned OTP’s taken from… Read More »
Problem: Read Opel Vivaro EDC16 via obd with foxflash to remove EGR on devinci but wasn’t available when tried different software write back in now got no revs. Launch X431 scanner gets injector fault code P0611. Any solution? Solution: Thi model is Renault engine. You lost injector codes. You need to recode them. If… Read More »
Question: The foxflash main box work with obd and direct connect bench. But if i used the in some cases if need, the bench box, no have connection. Is there any way to test bench box? Connect the bench box to the foxflash tool and power it through th round jack of the bench… Read More »
PCMTuner dongle (pcmflash 1.2.0) will read Gen2 Mazda3 (2010+) ECU via OBD module 9. If already remove ECU from car, it can be read via OBD on bench mode using Godiag adapters. Tools used: Scanmatik pro2 PCMTuner dongle Godiag GT100+ breakout box Godiag ECU Boot GPT adapter (the adapter can be used with pcmflash… Read More »
Question: How to read Mercedes Delphi CRD2.16 ECU with foxflash? cannot find wiring diagram to this ECU. Solution: Jtag boot read this ecu. Same pinout as Delphi CRD2.10 SOLENOID OBD JTAG_BOOT. Connect the multifunction cable as follows: Solder 3 links on the pcb: Solder the rainbow flat cable on the pcb: To read and write use… Read More »
Problem: I installed foxflash tool on one laptop, no problem. Now i want install it to a different laptop and i can not continue. How to log in foxflash on second laptop? Solution: Just use the same email and code (device S/N) as you input on 1st laptop. Read also: http://www.pcmtuner.org/foxflash-ecu-software-installation-guide/
Good News! Factroy promotion for ordering foxflash! Order foxflash get 15 days Unlimted tunning File for free Promotion time: From October 16th to October 31st, 2023 Requirement: There will be 15 days from the time of purchase of equipment to activation to make modification files for free. You can make any of the following 16 function, there… Read More »
