Problem: I tried to read Edc16c32 Mercedes w245 180cdi but Fetrotech tool software shows error s1 and s2 pinout error. Any solution Solution: The error means it not going into service mode, check the other connections and depending on brand of c32 MERCEDES/SMART EDC16C32 have 2 different pinout options. If your pinout not working, try… Read More »
Here is the another fetrotech tool fix from Marty pcmtuner. Issue: Task bar killed. Tried admin, no antivirus. Task bar disappears after the splash screen! Solution: Just do a CTRL+ALT+DEL and open the task manager, then look for any instances of “windows explorer” if there are more than 1 you will right click… Read More »
Little precision I tried to read an edc17c42 with fetrotech tool following the pinout of the fetrotech support impossible to read. I opened pcmtuner and noticed there was a pinout error on can H can L. I followed this hook-up and I retried with fetrotech he read it quickly. Here’s a little precision. network can… Read More »
Renault Laguna III 2.0 EDC16CP33 doesn’t work with the Fetrotech Tool black edition, any solution? Solution: on EDC16CP33 GPT0 may need pulled up to enter boot mode. often on old PSAs or Renault. A quick dirty example of a CP33 with GPT0 pulled down via 2K resistor, which may cure some CP33’s for renault… Read More »
New test feedback: Fetrotech tool read and write Peugeot Citroen PSA Bosch MD1CS003 ECU full flash and eeprom successfully. Use the fetrotech silver edition with pcmtuner. Car starts. Fetrotech MD1CS003 PSA pinout Read and write ok
Here is the working solution to Fetrotech tool (both silver and black edition) software crashes or taskbar disappear problems. Preparation: Download Win11 64bit operating system and “One-click backup and restore” tool Win11 64bit System One-click backup and restore Windows 11 system activation tool NOTE: Don’t put these files on Disk C. Put them… Read More »
Problem: I have an ecu edc16cp33 Laguna 3 which is supported by fetrotech tool. Fetrotech can’t find ecu on the 3 pinout available. And i can’t find boot pinout fetrotech Please help Solution: Problem with EDC16CP33 is there are 2 processor types (MPC561 and MPC564) only one is supported. Do it with K-tag. Also read… Read More »
Fetrotech tool black read and write VW EDC16C34 ECU flash/eeprom good. I also have a pcm tuner which works very well under windows 7 (win 7 pro sp1 full update and edge navigator). I don’t like Windows 10. My choice is for the standalone black version because for me each tool must be standalone. Read… Read More »
Fetrotech tool edc16c34 flash and eeprom read/write ok on bench
New test feedback from iecutool.com customer: well received Fetrotech tool and fast activated thanks testing PSA edc16c10 read write ok checksum ok read and write on bench
