What is the difference between OBDSTAR DC706 bench V2 and Bench V3 jumper cables? 1. The jumper cable that comes with DC706 package is the Bench-B V2 cable. It is used with P004 adapter to clone some ECMs/TCMs. The bench-B V2 cable connects with P004 adapter like this: 2.The jumper cable that was… Read More »
This guide demonstrates how to clone a Vauxhall/Opel GM BCM (Body Control Module) with part number 13589056 using OBDSTAR DC706, including immobilizer data transfer and PIN code extraction. This process is essential when replacing a faulty BCM while retaining original vehicle security data. Tools Required OBDStar DC706 (or X300 Classic G3) P004 adapter… Read More »
Problem: I tried the OBDSTAR DC706 immo off function for gearbox dq200 0cw version k with immo function doesn’t work. Anybody else try that? Possible solution: IMMO off on DQ200 (0CW, version K) can be tricky — most tools struggle with it. The ECU and TCU are linked via CS and MAC, so… Read More »
The OBDStar DC706 ecu tuning tool recently added a new feature that has sparked excitement among automotive enthusiasts and tuners: an ECU Unlock tab for the Chrysler GPEC2A ECM. This update suggests a streamlined way to unlock ECUs for tuning, potentially eliminating the need for manual hex editing or file transfers. But does it actually… Read More »
In this blog, we’ll break down a real-world attempt to read this Bosch EDC17CP09 (DDE) using different tools, the challenges faced, and the eventual solutions that worked. Tools Tested for Reading BMW EDC17CP09 1. OBDStar DC706 Issue: The tool suggested installing a 120 Ohm resistor but still couldn’t establish a connection. Solution: Later discovered… Read More »
Problem: 2017 Audi A3 DQ381 gearbox TCU. OBDSTAR DC706 read the original TCM just fine. Got to write to the new TCM (new one from Audi), and received this error. Here is the clue. You can’t clone VAG DQ381 Gen2 from factory, only gen1 DQ381 (0DE). Only option it’s Odis online and immo adaptation. No… Read More »
OBDSTAR DC706 or G3 will do VAG Bosch ME7.5.10 Kline ECU immo off in boot mode. Check instructions here. Quick search ME7.5.10 Kline ECU Select Boot mode with MP001. Check instructions and wiring diagram. Open the ECU module cover and solder the wires according to the soldering diagram. Connect ECU. Read and save ext eeprom.… Read More »
OBDSTAR DC706 new user report: Did a 2012 Chevrolet Cruze ecu clone E78. I read both the eeprom and flash files and wrote both files to the new ecu. Using P004 adapter on bench mode. Better read ShadowFlash as well. DC706 offers us the option of writing by boot, but when trying to connect, the team… Read More »
OBDSTAR DC706 user feedback: Hyundai continental ECM+TCM SIM2K-250. Bench mode I can read ecu info but can’t connect to read and write. Change boot mode, it works. Read + write by boot mode 20 minutes job. Use a MP001 programmer and better power supply. Job done. Photo attached:
OBDSTAR DC706 new user feedback: It is a VW Bosch ME7.5 ECU, Part number 0261207619. it doesn’t give access. Entering through ME7.5.10 kline menu even though the ecu is 80 pins still does everything ok. Function: Read EXT eeprom 95040 Read EXT flash 29F400BT Write EXT eeprom 95040 Write EXT flash 29F400BT Read pin code… Read More »
