Audi Edc16cp34 Foxflash read Read ok, Writing ok, checksum with foxflash. Car starts no problem. BOSCH EDC16 CP34 [ MPC563/4 ] – Audi, VW, Seat, Skoda [Diesel] Bench Pinout To read and write use the following driver: → BENCH MODE → [brand] → MPC563/4 – [brand] → EDC16 CP34 Normally foxflash software will read… Read More »
Version 1.3.0 of the FoxFlash Manager is now available. The manager has been improved and now 3 computers to 1 tool. After download, restart foxflash Manager, install drivers. Your tool can now be used on a total of 3 computers without need to unbind. It’s automatic now , needn’t send email for active 3 pcs.… Read More »
Foxflash software multiple installations guide- When we say up to 3 computers we do not mean simultaneous use. Your hardware is bound to your computer. If you wish to install it on another computer, your hardware needs to be un-bonded from others. To do this please contact dfb-technology.com. You only have one tool, not multiple,… Read More »
Problem: Installed FoxFlash software on win11pro, activated via fox flash manager program The app keeps flying out. Any solution? Solution: You must run the foxflash manager (Keep Foxflash manager open, do not close), then shut down your laptop auto time sync button, then click active as activated, then go running foxflash.
Foxflash ecu programmer arrived today. Tested with “Smart 453 NA ECU MED17.9.20” Read: ALL OK, EEPROM only OK, Flash only OK Write: ALL ok, EEPROM only OK, Flash only OK For confirmation, check the identity of each written data and the original data OK Although it is a test on a high-spec PC, if this… Read More »
FoxFlash ecu tool was arrived and activated. The first test was a VAG EDC17C64, it works fine. Set up bench wiring connection Foxflash EDC17C64 bench pinout To read and write use the following driver: → BENCH TRICORE → VOLKSWAGEN / AUDI / SEAT / SKODA → TC1797 – VAG → EDC17 C64 Foxflash software… Read More »
How to install and activate FoxFlash ECU tuning software? Operating system: Compatible Operating Systems: Windows 7 Windows 8/8.1 Windows 10 Windows 11 Recommended Configuration: CPU > 2.5 GHz (Intel i5, i7) RAM > 4GB 64 bits Software language: Italian, English, Dutch, French, Spanish, Polish, Portuguese, Romanian, Czech, Turkish How to use foxFlash Manager… Read More »
Today first one with New tprot. Edc17cp20 vw T5 2.0 Biturbo stage 1 dpf agr off. PCMTuner ench 71 unsuportet t-prot. 5 minutes later opend ecu. Module 53 bsl 1 cable for bootpin. Read password Read flash and eeprom 10 minutes later write Back and all fine. always good to have the BSL option because… Read More »