NEW AUTOTUNER PROTOCOL UPDATE! We are updating our OBD protocol for Continental EMS24xx ECUs installed in Ford and Mustang vehicles. Until now, only virtual reading (VR) was available for these ECUs. This operation has now been replaced with a real reading (NR) directly via the OBD port. This ensures full compatibility, without depending on the… Read More »
In this article, we will explore the process of cloning a Smart 450 Body Control Module (BCM) using the Xhorse Multi Prog tool. The goal is to read and transfer data from the original BCM to a replacement unit, ensuring seamless functionality. Step 1: Preparing the BCM The first step involves connecting the Multi prog… Read More »
Problem: Failed to start PADflash software after activation. Win10 64bit system. Error 1: Connection to tool lost. Error 2: Device Init Error. Solution: 1. Disable USB selective suspend/power-saving for all USB ports. This turns off USB sleep mode to prevent devices from disconnecting. 2. Enable Administrator Mode.” (Activates standard administrator privileges for the account.) 3.… Read More »
New AutoTuner Protocol Update! We continue to perfect our OBD protocols, this time for Alpina, BMW, and Mini vehicles equipped with Bosch EDC17C06, EDC17C41, EDC17C50, EDC17CP02, EDC17CP09, and EDC17CP45 ECUs, exclusively for E-Series. This protocol update introduces our automatic patch detection, drastically reducing the writing time once the ECU has been patched: from around 6… Read More »
Problem: Anyone getting same? Flex ecu programmer will not connect with Flex box software. Possible solutions: 1. Restart PC , restart Flex 2. Try reinstalling Flex Feedback: Had to reinstall software clear cache
Problem: I failed to run the PADFlash programmer software; it says the driver was not found. I tried to install the driver manually, but the button is gray. The USB dongle was inserted into the laptop. How can I fix it? Solution: This laptop does not have a USB 2.0 port. There is a USB Hub in the… Read More »
FormulaFlash ECU and TCU programmer released a new software update on April 28th, 2025. No.1 IMPORTANT UPDATE Added Hyundai Kia ME17 series, MED17 series, MEG17 series EPROM read /write/CS &VIN modification. No.2 IMPORTANT UPDATE Added Delco’s E37/ E39/ E39A/ E67/ E78/ E87/ E98/ E92/ E80 /E83 power upgrade (stage 1) + idle speed… Read More »
As titled, here we will show how to extract pin code for Peugeot Citroen PSA Continental SID807EVO ECU from flash data. First of all, make a full backup reading of the Continental SID807EVO ECU in boot mode. Using ktag/kess3, Foxflash, Xhorse Multi Prog, Flex or other programmers in boot. If use Foxflash, check the… Read More »
Problem 1: Got the PADFlash programmer software installed on a Win8 64bit system, Windows detects the device driver, click Activate, but padflash software did not start. Any solution? Solution: PADFlash software cannot be installed on Windows 8 operating system. Only Win7 64bit or Win10 64bit system. Win7 64bit is the most stable system for padflash.… Read More »
Possible to read Mercedes Benz ME9.7 ECU with Xhorse Multi Prog? Need to clone the ECU. Multi prog will read and write Benz ME9.7 ECU via OBD mode. Multiprog reads only maps in obd mode, no immo or full read, so it cannot be used to clone this ECU. Use other programmers if you want… Read More »
