Problem:
Foxflash read MSV70 E60 523i via OBD, wrote mod, but failed. tried to write ori again, gets stuck at 93% anyone had this issue?
Solution:
Voltage looks low, write at least 13.8v.
If still failed to write mod file, only if Mod file bad, you will need to Write original file in BDM.
Foxflash Pinout to Siemens MSV70
Solder the dip/sip connectors on the pcb and do a link:
To read and write use the following driver:
→ BDM/ JTAG MODE
→ BDM MPC
→ MPC55x/56x