How to read and write by FoxFlash through Bench mode Honda Civic MK10 2018 MED17.9.3 ???
Honda edc17 med17 have been done bench and boot.
There are 2 options in FoxFlash, bench read and write through and another option bench and boot through pinout.
Foxflash Honda MED17.9.3 bench pinout
BOSCH MED17.9.3 [ TC1793 INT.F.] – Honda
Kit to use:
— Multifunction cable
– 1 resistance of 1000 Ω
– 3 resistances of 1000 Ω (for boot method 2)
To read and write use the following driver:
→ BENCH TRICORE
→ HONDA
→ TC1793 – HONDA
→ MED17.9.3
Foxflash Honda MED17.9.3 boot pinout
Step 1: Password Search
Connect the pinout below with multifunction cable.
Use the driver:
→ TOOLS BOOT MODE
→ INFINEON TRICORE Tool Password
→ PASSWORD BFT
→ Click on “Find Password” and follow the software messages.
Now that the password has been found it’s possible to read and write the control unit. See next step.
Step 2: Read and Write ECU
Connect with the multifunction cable the following pinout and the boot shown below.
Use the driver:
→ TOOLS BOOT MODE
→ INFINEON TRICORE Boot
→ SAK TC1793
