Question:
Can pcmtuner read this Delphi CRD 11 ECU from Mercedes. or other tools?
PCMTuner will not read crd11.
Ktag will read and write via BDM.
ECU – Ktag
3-6
2-1
4-5
6-10
8-7
10-8
And make 2 Bridge.
Ktag Protokoll 119
Ecu Delphi DCM3.2 CRD.11
Foxflash/KT200 will read it via OBD or Jtag.
Foxflah pinout to Delphi CRD 11
1). Kit to use for connection with JTAG flat cable:
– Multifunction cable
– Flat color cable
Connect multifunction cable as follows:
Solder the rainbow flat cable as in the photo:
To read and write use the following driver:
→ BDM/ JTAG MODE
→ BDM MPC
→ MPC55x/56x
3). Kit to use for connection with BDM adapter:
– Multifunction cable
– Delphi adapter
– Grey flat cable
– Connectors dip/sip
Connect multifunction cable as follows:
Do a link as in photo:
Solder the dip/sip connectors on the pcb:
Insert Delphi adapter in REVERSE as in photo:
To read and write use the following driver:
→ BDM/ JTAG MODE
→ BDM MPC
→ MPC55x/56x