Tag Archives: Fetrotech pinout
Fetrotech Tool Read and Write Audi A4 EDC17CP20
Fetrotech Tool MED9.5.10 S1 and S2 Error Solution
Fetrotech Tool Read and Write BMW EDC16C35 OK
Fetrotech Tool Mercedes EDC16CP31 Pinout
Some users had problems reading Mercedes EDC16CP31 ECU with fetrotech tool. Tried all listed pinouts on pcm tuner list, no connection. Says s1&s2 pinout error. Users found a few different pinouts for this ECU and none of them worked. Solution: Please see attached for Mercedes-Benz EDC16CP31 on fetrotech. Use this top pinout pay attention to… Read More »
Fetrotech Tool Failed to Read Citroen 2020 Md1cs003?
Q: Fetrotech tool black not possible read Citroen c5 aircross 1.3 puretech Md1cs003 2020year. There is no access to the ECU. Solution: Security change on most MG/MD ECU in 2020 Fetroteh tool cannot read if car sold after july 2020. ecu is locked. After 2020 not all Expensive tools support, in fact BMW/toyota still not… Read More »
Fetrotech Tool Read Hyundai EDC16C39 on Bench
Fetrotech Tool Mercedes EDC16C2 Pinout
Fetrotech Tool EDC16C32 S1 and S2 Pinout Error Solution
Problem: I tried to read Edc16c32 Mercedes w245 180cdi but Fetrotech tool software shows error s1 and s2 pinout error. Any solution Solution: The error means it not going into service mode, check the other connections and depending on brand of c32 MERCEDES/SMART EDC16C32 have 2 different pinout options. If your pinout not working, try… Read More »
Fetrotech Tool Failed to Read EDC16CP33 Solution
Renault Laguna III 2.0 EDC16CP33 doesn’t work with the Fetrotech Tool black edition, any solution? Solution: on EDC16CP33 GPT0 may need pulled up to enter boot mode. often on old PSAs or Renault. A quick dirty example of a CP33 with GPT0 pulled down via 2K resistor, which may cure some CP33’s for renault… Read More »