Foxflash has a OTB adapter to read some ECUs via OBD on bench mode. You can also use the Godiag GT100 breakout box+ the GPT adapter to replace the OTB adapter. We can use gt100 diag table + gpt addon as otb adapter. For people seems to forget the reading part: THIS IS PROOF OF… Read More »
Foxflash new user feedback: BMW F10 Continental MSD87. 1 TC1796 PASSWORD SEARCH successfully Using the OTB adapter Protocol: Tool Boot mode->Infineon Tricore Tool Password->OBD Password MSD80/81/85/87 BMW OTB pinout is in the foxflash document.
Foxflash new user feedback: Mini One 1.6 Gasoline Just get ECU Siemens EMS5150 not car Read ok with OTB 1.0 adapter Write ok with OTB 1.0 adapter E85 Checksum by WinOls All perfect. OBD on bench pinout is on the document.
Foxflash read and write Mercedes Benz Sprinter EDC15C6 via OTB mode successfully. OTB adapter is a great help. Mercedes Sprinter with a round OBD plug that requires an adapter. Simple and easy with the help of OTB. Check EDC15 C6 bench pinout Select Car OBD, Mercedes Sprinter CDI E3 EDC15C6 protocol Read ok Write ok… Read More »
Foxflash new user feedback: read and write Peugeot EDC16C3 ECU in OTB mode (via OBD on Bench) Using OTB adapter you use it as OBD when you have an ECU on the table. You use the OBD protocol from Foxflash when you have the ECU removed, it’s exactly how you would read the OBD on… Read More »
Caution! One of our customers uses foxflash tool with ecuhelp OTB2.0 adapter, he cannot download or activate the device. Error “Detected potential use of an unofficial adapter. Devie protection enable”. Foxflash server detects he uses an unofficial adapter. Device protection mode is enabled. His device is locked. Don’t use 3rd party adapters with foxflash.… Read More »
Where to find foxflash OTB adapter pinouts? Open the foxflash manager install folder there is a folder called ‘Document’. The OTB pinout can be found in the document folder. PDF format in Help folder or check online version via browser. For example, search desired ECU in ‘help’ folder, i.e EDC16U1 You will see bench… Read More »
Iecutool.com here shows an example of using the Foxflash and OTB adapter to read a Mercedes Crd3 ecu using obd driver. This is the CRD3.20 ECU What’s needed: Foxflash OTB Adapter Power supply OBD Cable Mercedes Benz CRD3.20 pinout Identify needed OTB connection Prepare some cable connections Connect to foxflash OTB adapter Connect to ECU… Read More »
What’s Foxflash OTB Adapter? The OTB1.0 adapter is suitable for foxFlash extended application engine and transmission computers, and is also suitable for ACM and DCM computer modules. Supported functions: 1: Dual-channel high-speed CAN 2: Three-way BOOT 3: Dual VCC power supply 4: GPT encryption and decryption function 5: Adaptive resistance 6: Adaptive CNF signal adjustment… Read More »
