Godiag GT107+ is the upgrade version of GT107. You don’t need to connect extra GT105 breakout box to read gearbox TCUs. Here is an example of reading VAG DQ200 gearbox using gt107+. Device used: Pcmtuner programmer or kess v2 (pcmtuner is faster than kess v2 to read DSG gearbox) Godiag GT107+ DSG gearbox… Read More »
Problem: Mercedes CDR2 foxflash reading performed OBD. Writing presents an error and presents a message to contact support. what is the solution? Solution 1: CRD2.10 etc is problematic with OBD, you can do JTAG. DELPHI CRD2.10 Solenoid – MPC5566 pinout to foxflash Connect the multifunction cable as follows: Solder 3 links on the pcb Solder… Read More »
Which tool to read this computer BMW MSV70 DME? Foxflash: Yes, via BDM Jtag Connect multifunction cable as follows: Solder the dip/sip connectors on the pcb and do a link: Insert Siemens/Marelli adapter as in photo: To read and write use the following driver: → BDM/ JTAG MODE → BDM MPC → MPC55x/56x Ktag/Kess… Read More »
Foxflash read Mercedes Vito Delphi CRD 2.20 ID via OBD ok, but had writing error and van won’t start. Jtag is needed? Solution: That protocol is not 100% working via OBD. Reading works but writing gives problems on CRD2.xx. Write original file with Kess v2 clone will do. Choose “recovery” without ID. You can easily… Read More »
