Audi A5 2.0 177bhp ECU EDC17C46. Read and write fine with pcmtuner dongle on bench. Module 71. ECU info. Bosch EDC17C46-2.22 0281018128 VAG using sm2 pro with pcmtuner dongle and bench power supply. NOTE: If pcmtuner failed to read this ecu, after transistors replacement, it works perfectly.
Problem: I have a problem with pcmtuner flash. I can read but can’t write EDC17c84 via OBD. Solution: Remove ecu and read/write again on bench module 71. If car not start by module 71 bench mode, the problem can be the checksum. After fixing checksums, it works on bench module 71. If not working, try… Read More »
Car Porsche Cayenne V6 3.0 TDi 262Hp (193 kW) Year 2015 ECU Bosch MDC17CP44 Olny Wire Bench (do not open cover). Original: Serie 262Hp PcmTuner bench read and Write successfully using Protocols Module71 Bosch MEDC17: TC1797 (Backup Flash,Eeprom). DTC REMOVE: P2196 Lambda OFF. Auto-Checksum with pcm tuner Diagnostic Machine –> Check DTC: No Error. Start.… Read More »
Fiat Ducato Edc17cp52 ECU works perfectly with pcmtuner. Fiat Iveco EDC17CP52 bench read/write without problem in module 71. Here comes the pcm tuner pinout to edc17cp52 It’s good. A lot of users did it in bench module 71 reading and writing ok without any problem. Requires capacitors on gpt connections. Need GPT1 +10uF or 100uF… Read More »
Nissan qashqai 2013 Edc17c42 Dtc off Read and write with pcmtuner without problem. Using external Laboratory power supply, 12.4v. select the module 71 TC1767 for read flash and eeprom. pcmtuner app will show you wiring diagram and instructions.
Honda EDC17C58 read and write with pcmtuner Bench module 71 successfully. DPF OFF + EGR OFF (Flash + Eeprom backup) Pcmtuner pinout Honda EDC17C58
Question: Edc17c59 Vauxhall zafira, following pcmtuner pinout and trying to read on module 53 tc1767 but no communication, am I missing something? Solution: well module 53 is BSL so unless you have opened ECU and connected boot pin then it wont read or write. Use module 71 in bench mode. Feedback: Got it… Read More »
Problem: What problem? I try to read Mercedes C320cdi edc17cp01 ecu with pcm tuner. Skipping when I upload a modified file to pcmtuner, the ignition turns on and off continuously. Solution: Calibration area so skips other parts of memory as informed, its normal, the problem is your file. Between 14000 – 1FFFF is otp it’s… Read More »
PCMTuner flash Iveco edc17c49 read/write OK. Here is the edc17c49 pinout to pcmtuner this is trick for iveco you need capacitor for gpt Make sure capacitor polarity is correct, + to pcm tuner and – to ecu. Put capacitor 10uF only between ECU pin 59 and gpt01 brown wire. There are 2 possibilities for canbus… Read More »
Iveco daily Bosch edc17c49 ecu read and write with pcmtuner module 71 on bench, dpf off all ok 10uf, 100uf 25v capacitor all work. capacitor in serial with GPT1 10uF to 100uF, + to pcm as ecu sinks signal if you have issues connecting to CP52 or C49 Iveco , use 47uF instead of 10uF.
