PCMTuner hardware can be used as a J2534 passthru device for soft like techstream, forscan, VIDA and lots of others tested. Here iecutool.com engineer tested pcmtuner with Nissan Consult iii plus V75.15 software. How to configure PCMTuner with Nissan Consult III+? Install pcmtuner driver (download driver) Go to Device Manager check if device is… Read More »
PCMTuner can be used as a good j2534 passthru device for multiple software. iECUTool engineer just tested latest version GDS2 2023.7 software with pcmtuner and confirmed it works great. Preparation: GM GDS2 2023.7.13 download PCMTuner driver download How to Install GM GDS2 2023.7.13 for PCMTuner? Download GDS2 software, install GDS2AutoInstall Delete GDS2… Read More »
Tested, Mercedes Xentry works no problem with PCMtuner. It works as scanmatik2 and only for Xentry Passthru version. It is easy to connect. Install J2534 driver. You can use pcm tuner obd with mercedes xentry software for diagnostic purpose. We don’t provide xentry free download resources. Search, download and tested by your side. PCMTuner… Read More »
PCMTuner has been tested working with many software programs as a j2534 passthru. http://www.pcmtuner.org/can-pcmtuner-be-used-as-passthru-j2534-for-odis-xentry/ Today we got new feedback from one of the iecutool.com customers. Acdelco tds (GM Chevrolet online programming), work perfectly with PCM Tuner. using pcmtuner as passthru Programming new ABS module on a Chevrolet Express 2WD 2013 You pay $45 per Vin… Read More »
Tested pcmtuner hardware 100 working on Jaguar Land rover JLR SDD. Using pcmtuner as Scanmatik passthru. Detected as SM2 USB device. Range rover Sport Bcm coding and reflash !!! it’s possible make it work offline. You just need a usb flash and another computer. Also tested on a Discovery L319.
Has anyone tested pcmtuner on xentry software for Mercedes Benz? Yes, PCMTuner tested working as a J2534 passthru device for Mercedes. You need the version of software called XENTRY Pass Thru. pcm tuner does not work with MB SD C4/C5 standard OpenShell version (XDOS). But w203 and w211 older not all works because they… Read More »
Test report: PCMTuner as passthru device for ODIS, tested on personal car for 5F module coding, great! pcm can be used in J2534 Passthru diag cable. so it works with Odis, Techstream etc. With quite a lot of builder software if their software takes care of diag passthru. So if we have the odis soft… Read More »
As we pointed out previously, pcmtuner works well as passthru j2534 device for OE programs. Today Techstreem Toyota quick test all good. tested version 16.00.020 on windows 10 64 bit. iecutool.com tested version 17.00.020 on win10 as well, no issue.
Question: Can PCMtuner be used as Passthru j2534 to work with other programs? For example ODIS, Xhentry, GDS2, Techstream, MDflasher and other Passthru programs! Has anyone tested it? Answer: Yes works with other flashers and many pass-thru soft like techstream, forscan, VIDA and lots of others tested. Our customers made tests with Canclip, Techstream,… Read More »
Renault Can Clip pass thru goes good with pcmtuner. Followed Renault Clip passthru Configuration guide from Mhhauto forum. ‘You need to trick Clip into believing your passthru (j2534) vci is an Alliance VI probe. There might be multiple ways of doing this, but the simplest that I have discovered is to set “Vendor”=”79B” and “Name”=”1B” on… Read More »
