Problem: Today i read and wrote md1cs003 adblue off using fetrotech tool. cheksum with fetrotech Car started 3 times and then it wouldn’t start And dtc ecu P3028 What To do? Solution: TPROT off needed for PSA MD1CS003. Make Tprot off. How to do tprot on this ECU? At the address: 0x2A5D40 2D 0F 00… Read More »
Problem: I have a problem reading Denso suzuki swift 1.3 Denso 64F7055 full system. I use pinout by foxflash. Do i do somethingh wrong? Here is the clue. Disconnect from ecu, USB and POWER. Resrart computer if you made many attempts. Switch off MFC, try 13.5v. Reconnect and ensure all connects to ecu are firmly… Read More »
Problem: Why I can’t save file on disk :C after reading beacause foxflash software stop? If choose disk 😀 is ok. I have one more question, When connect the power supply to foxflash and when connect the power supply to bench box? Solution: 1. Windows permissions. Try save to documents folder or other public folder… Read More »
Problem: I failed to read Fiat Ducato Marelli MJD 8F IAW ecu with the foxflash programmer on bench. It reads ID but failed to read data (error boot1). Any advice? Solution: Foxflash will read and write Marelli MJD8F full system. It will read the whole backup. DON’T CONNECT BENCH BOX WHEN READ THIS ECU. You… Read More »
Problem: I have a problem with my new KT200 programmer. Run KT manage, but software failed to start. It gave me errors below: Solution: Most of the case is the operating system issue. Change a Windows 10 64-bit system laptop. 1 Shutdown date and time automatically syncs 2: shutdown defender 3: shutdown antivirus system 4:… Read More »
Can foxflash read tc1738 in Hyundai sim2k-341? Yes, read in BDM/Jtag mode. Foxflash pinout to Siemens SIM2K-341 – Kia [MPCZ561 ECU] Connect multifunction cable as follows: Solder the dip/sip connectors on the pcb: Insert Siemens/Marelli adapter as in photo: To read and write use the following driver: → BDM/ JTAG MODE → BDM MPC… Read More »
Foxflash read and write Peugeot 2008 year 2019 MD1CS003 on bench successfully. *** Peugeot 2008 1.5 BlueHDi 100hp *** *** Year 2019 *** *** MOTOR CODE YHY *** *** MD1CS003 Bench mode *** *** Read/Write/ChecksumBy FoxFlash *** *** AdBlue OFF ***
Some users reported they try to download foxflash software to a new computer but showed this message: Error “Execute Download with DFBTech_UPDATER for Tool” Solution: Make sure 1. Defender off. (*We found part of them did not turn off real-time scanning windows. This also causes the error to occur.) 2. Date/time sync off ( Open… Read More »
How to read and write FCA Chrysler Jeep Dodge CONTINENTAL GPEC4LM ECU with foxflash? Check foxflash pinout to CONTINENTAL GPEC4LM BAM SPC5674 CONTINENTAL GPEC4LM FCA Pinout Connect with the multifunction cable the CNF1 on the pcb. Read and Write ECU Use the driver: → TOOLS BOOT MODE → MOTOROLA FREESCALE BAM → FCA CONTINENTAL GPEC4LM
Foxflash recent update adds FCA Dodge CONTINENTAL GPEC4 ECU. Here is the foxflash pinout to CONTINENTAL GPEC4 BAM SPC5674 CONTINENTAL GPEC4 FCA Pinout Connect with the multifunction cable the CNF1 on the pcb. Read and Write ECU Use the driver: → TOOLS BOOT MODE → MOTOROLA FREESCALE BAM → FCA CONTINENTAL GPEC4
