Foxflash DLL Cannot be Loaded Problem Solution
Problem: I got a problem running foxflash software, error “The DLL LIBCURL.DLL cannot be loaded” (shown image below). Any suggestion? Solution: Operating system issue. Change a clean system. Better be Win10 64bit. 1 Shutdown date and time automatically syncs 2: shutdown defender 3: shutdown antivirus system 4: run foxflash manager click active button 5 :… Read More »
Foxflash Pinout to Ford PSA Fiat Visteon DCU102
Foxflash programmer can read and write Ford/Fiat/Peugeot/Citroen DCU102 Visteon ecu in boot mode. You must copy flash in ST10 boot mode and eeprom. Kit to use: – Multifunction cable – 2 resistance of 1000 Ω Connect multifunction cable and the resistances as shown To read and write use the following driver: →… Read More »
DIY John Deere 9-PIN Adapter for Foxflash KT200
User contribution: How to build an OBD2 to 9pin adapter for reading John Deere,NEW HOLLAND etc using foxflash/kt200? You can make this how to make an adaptor from DFOX tool to Dimsport cables. this also works with all the Foxflash-KT200 etc and Alientech cables. and buy a JD cable for Dimsport New Genius.
EDC17CV41 Pinouts to PCM and Foxflash
Both pcm and foxflash will read and write EDC17CV41 ECU on bench. PCM EDC17CV41 Pinout Edc17cv41 Read/Write, checksum ok. Need to check whether you have version 1 or 2 as gpt pins go on different pins / point. worked on pins GPT 66 68. used module 71. Foxflash EDC17CV41 Pinout Connect the multi-function… Read More »
Foxflash Read and Write PSA EDC16C34 on Bench
Foxflash Read and Write Volvo EDC16CP31 on Bench
New use report: Foxflash read and write Volvo XC90, 2.4d D5 EDC16CP31 on bench successfully. Reading – ~2min (all – ext.flash + eeprom) Writing – ~1min (only ext.flash) Checksum by foxflash. Foxflash EDC16 CP31 pinout To read and write use the following driver: → BENCH MODE → [brand] → MPC563/4 – [brand] → EDC16 CP31
Foxflash Read and Write Alfa Giulietta EDC16C39
Foxflash Fiat Marelli 8GSF ECU Pinout
Foxflash tool will read and write Marelli 8GSF via OBDvr (if there is file on server), bench and boot mode. MARELLI 8GMK / 8GMF / 8GML / 8GSF – Fiat, Opel, Suzuki [Gasoline] Pinout to Foxflash Fox flash supports following 8GSF ECUs: Abarth car Marelli 8GSF MPC5553/5565 EEPROM 95640 / 95128 R/W CAN… Read More »
Foxflash Not Start Only Show USB Serial to Converter DIY Repair
Recently some users reported they cannot start foxflash software. The usb device does not show as “Dfox” but “USB to serial converter”. Like we said in this post, in most cases the “version.dll” file in dfb folder has been eaten by the anti-virus program. Downloading this file will solve the problem. Here is another… Read More »