Fetrotech Black standalone read and write Med9.1 MPC562. Read very fast. I’ve tried on two ecu and everything is fast. read fast and pinout is good. Checksum its ok for that ecu. Wrote succeed. check bench pinout in tuner-box.com Read and write no problem.
Foxflash ecu programmer released a new update on February 23rd, 2023. Protocols for Porsche PDK February 25, 2023 You can easy read & write Porsche PDK gearbox now! SUPPORTED CONTROL UNITS & VEHICLES BOOT Porsche 911.2 Siemens PDK4000 Porsche 918 Siemens PDK3000 Porsche 918 Siemens PDK4000 Porsche Boxster 718 Siemens PDK3000 Porsche Boxster 981 Siemens… Read More »
Problem: Error micro not recognized when reading Volvo SIEMENS SID803 ECU using foxflash programmer. In BDM mode it does not go. Any solution? Solution: The power supply (12v) which came in the box will not help you with this ecu. Use a lab power supply. Had this problem with the power supply from the box… Read More »
Problem: How to read Audi 4F ecu with fetrotech? It failed to read this ECU on bench. Solution: Audi 4F bench reading problem solved. Connection in picture attached and you have to add can low can high wire to pin 89 and 66
What’s Fetrotech SEIKOTOOL ECU Extractor? Fetrotech seikotool ECU cover extractor is designed for ECU worker and chiptuner. It helps to remove/ install car ECU module cover easily. Fetrotech seikotool ECU cover extractor is a useful tool for opening the ECU. Fetrotech seikotool ECU cover extractor works perfectly with ECU tunning tools MPM, Fetrotech, PCMTuner, Foxflash, Autotuner,… Read More »
Fetrotech tool silver read and write BMW E90 EDC16C35 successfully, Dpf off. Checksum ok, very fast read/write. The fetrotech silver works separately from pcmtuner. I made a change like this.
Vag can pro unbricking edc16u1. Fetrotech tool eeprom immo off and stage 1 + egr tva off read write some ECU yes, some no, vag can pro need service files, and then you play. now for that you need to have one of the online services to be able to download certain or be patient… Read More »
Problem: My Fetrotech tool black does not read med9.5.10 ecu. It says s1 and s2 pinout error. Any solution? with this pinout Solution The pinout is correct. But try connect extra power+gnd+canbus like this (also s1 s2)
Fetrotech tool silver with pcmtuner read and write Mini/BMW/PSA 1.6HDI Bosch EDC16c35 ECU no problem. Car starts without problem. Fetrotech pinout to EDC16C35 Read and write ok
Problem: I need the Fetrotech tool pinout for EDC16U31, I tried to use the pinout from Tuner box but the error is S1 and s2 pinout error. Solution: Use the first wiring diagram. Fetrotech read ok. Try swapping GPT’s, others have reported connecting the CANL and CANH also can make it read.
