Foxflash new feedback: Kia/Hyundai sim2k 141.1 read ok used sim2k 1.40…. Write ok. it was just a copy. No modified files used. Also when writing all files at the same time, did not do Checksum.
Foxflash new feedback from Mr. Cornel Grijincu. Porsche Macan 2019 EDC17CP44 read on bench write on bench Checksum by fox Bench pinout to Porsche EDC17CP44 To read and write use the following driver: → BENCH TRICORE → PORSCHE → TC1797 – VAG → EDC17 CP44 www.iecutool.com
What’s the difference between Foxflash and the new KT200 II 2nd generation ecu/tcu programmer? Foxflash: free online update to get more protocols. KT200 II: it’s a separate new hardware with new protocols Foxflash: more stable KT200: less stable, often bricks ECU Foxflash: reading and writing is faster and stable in the long run. Direct update… Read More »
Big boom news quickly go to update your foxFlash tools. Delco Bosh Siemens Phoenix Tuning and New Clone Function Available November 15, 2023 After several weeks of extensive BETA testing for ecu and tcu, we are excited to announce the addition of a solution for this variant. foxFlash is now able to perform the following… Read More »
Foxflash new feedback from Mr. Cornel Grijincu. VW Amarok 2014 EDC17C54 read and write on bench ok, checksum by foxflash. Bench pinout to EDC17C54 To read and write use the following driver: → BENCH TRICORE → VOLKSWAGEN / AUDI / SEAT / SKODA → TC1797 – VAG → EDC17 C54 www.iecutool.com
Foxflash user feedback: Peugeot boxer 2,2hdi 2016 PSA SID208 is done with foxflash. Procedure to follow with foxflash. -Read password in obd (follow instruction foxflash) -Disassemble the vehicle’s ecu -Open up the ecu -Follow the pinout instructions provided by foxflash -Id ecu -Read the ecu -Modify file -Write the echo It’s 100% working. Foxflash SID208… Read More »
User feedback: Foxflash read and write BMW E90 ZF 8HP70 transmission gearbox successfully. Foxflas pinout to BMW ZF 8HP transmission Attention: There are 3 versions of pinouts, you can try all 3 without doing any damage. In addition to the ECU flash file, Foxflash software also saves the coding file.For writing:If you select the… Read More »
Some users reported that they failed to read any ECUs with foxflash by OBD or bench mode. Wiring connection is ok, raise voltage, all no luck. Here comes the foxflash technician solution: DON’T save file to disk C or deskptop. Save file to disk D/F etc should be fine.
Foxflash failed to read BMW 328i Bosch MEVD17.2.4 ECU via OBD? If failed to read via OBD, try bench or boot read. Foxflash BMW MEVD17.2.x bench pinout
Foxflash new user report: read and write Hino EDC7UC31 ecu successfully. Vehicle – HINO Truck Engine – A09C ECU – EDC7UC31 Tuning stage 1 (DPF+EGR) stock power – 301HP upgrade – 360 HP (+59HP) Stock Torque – 1079 NM upgrade – 1295 NM (+216NM) To read and write use the following driver: → BENCH… Read More »
