Today a EDC16C34 arrived in the famous Peugeot 5008. Foxflash is capable to read and write it flawlesly with no problems at all. Keep voltage as 13.4V. In case software hangs up – you can kill it wit the other EXIT button. Pinout is standard only K bus wire www.iecutool.com
New use report: Foxflash read and write Volvo XC90, 2.4d D5 EDC16CP31 on bench successfully. Reading – ~2min (all – ext.flash + eeprom) Writing – ~1min (only ext.flash) Checksum by foxflash. Foxflash EDC16 CP31 pinout To read and write use the following driver: → BENCH MODE → [brand] → MPC563/4 – [brand] → EDC16 CP31
Foxflash tool successfully read and write Alfa giulietta 1.6jtdm 105cv 2012 Edc16c39 on bench. Read -> eeprom /flash Write -> flash Checksum Manually. 1st pinout in the document.
Foxflash tool will read and write Marelli 8GSF via OBDvr (if there is file on server), bench and boot mode. MARELLI 8GMK / 8GMF / 8GML / 8GSF – Fiat, Opel, Suzuki [Gasoline] Pinout to Foxflash Fox flash supports following 8GSF ECUs: Abarth car Marelli 8GSF MPC5553/5565 EEPROM 95640 / 95128 R/W CAN… Read More »
Recently some users reported they cannot start foxflash software. The usb device does not show as “Dfox” but “USB to serial converter”. Like we said in this post, in most cases the “version.dll” file in dfb folder has been eaten by the anti-virus program. Downloading this file will solve the problem. Here is another… Read More »
Question: Will Foxflah Unlock and read a L5P GM ECM? Does Foxflash have the unlock service as hptuner*? *HP Tuners offers TCM/ECM/PCM unlock service for tuning support in the latest version of VCM Suite. Yes, foxflash has the unlock service as hptuner. When you need unlock some ECU then work with… Read More »
Problem: FoxFlash Tool can’t connect to EDC16C1 ecu, pinout according to instructions on fox software, I tried on 3 different ones with no result. Some solutions? Solution: Different HW version. Pinout on FoxFlash could work for other c1 versions but not for this one. Solution: 1.Check connection and power supply Pinout (K-Line): *Watch white cable because… Read More »
Car model: BMW 525D ECU type: EDC15C4 Symptoms: After running out of battery, the car does not start. Error code: 02 EWS key code variable incorrect Attempt: tried to do synchronization to reactivate it, but unfortunately all attempts failed Final result: had to cancel the protection code immo off by reading the flash with foxflash… Read More »
Problem: I got the foxflash software installed, but when i run foxflash manager, it gave me the error “Object Reference Not Set to An Instance of an Object”. Same error when i change Win7 and Win10 laptops. Any advice? Solution: Your system is missing net framework and runtime. Download net framework on www.iecutool.com “Download” area.… Read More »
Foxflash will read and write Renault Getrag DC4 transmission TCU on bench. You don’t need to open your Getrag DC4. It will read and write flash and make full backup. Getrag DC4 can be found in following Models: Renault TCU Captur Getrag DC4 GENERAZIONE 1 BENCH Renault TCU Clio Getrag DC4 GENERAZIONE 1 BENCH… Read More »
